A small home safe is a lockable steel box designed to keep your valuables “safe.” It is designed to keep your assets safe, whether they’re cash, jewelry, or important documents, as the name implies. It can be concerning, though, if you are unable to unlock your safe. You’ll probably be worried out of your mind and want to call a locksmith service to see what is wrong. Before calling a locksmith, you might want to check for yourself first. Here are common reasons why your safe might not be working correctly and what you can do to fix the problem.
The Bolts are Jammed
The bolts of your safe may be jammed. As you hear the motor trying to retract the bolt work, the jam could be the reason why your safe will not open. To loosen the bolt work, press firmly on the door a few times. However, avoid pressing on the keypad or the handle. After that, pull the handle in the opposite direction than usual and enter the code.
Malfunctioning Electronic Lock
Take the manual with you, double-check the code, and make sure you are doing everything correctly. The safe door should open after a few seconds if you entered the correct code. You may need to operate a lever first, depending on the safe. If you wait too long, the safe‘s lock will close, and you will not be able to unlock it.
Have you tried your code multiple times, and your safe still will not open? If the safe is locked, wait at least half an hour before attempting again. Is the lock working correctly, and your code is being accepted, yet your safe is not opening? Replace the batteries if necessary. The batteries may not be strong enough to open the lock, even if you input the correct code. If it still fails to work, you might have to consult safe repair Sherman Oaks.
Check the Batteries
When not in use, all electronic locks go into power-saving mode. If you open the safe three times a day, it should last at least a year. If you open the safe 25 times a day, the batteries will typically need to be replaced after about three months. The brand and kind of battery and the circumstances, temperature, and atmosphere significantly impact performance.
Key locks typically work well and do not have many problems. On the odd occasion that opening your safe proves difficult or impossible, your key may be damaged. It may be hard to lock the key or turn the key. If at all possible, avoid using force and keep your safe open.
Your Code was Deactivated
Many safe owners overlook this step, and your code may have been deactivated as a result. It may be why the safe will not even open. You could ask someone to test the code to check if it works. If not, you may have to consult a locksmith service to see the problem.
Damaged or Disconnected Wiring
Another possible cause is faulty or disconnected wiring. Remove the keypad and inspect the wires for looseness to check if they have been loosened. If this is the case, reconnect them or do a simple repair. If they appear to be in good condition but are not working, they’re probably damaged. You may need to call a specialist if the cables are damaged.
If your safe is still not working correctly, who can you hire for safe installation Sherman Oaks? Sherman Oaks Lock & Safe is available around the clock for safe installation Los Angeles at affordable prices. Their services have everything you need and more, so help is never too far away.